So good on Hal for asking me about my avatar and motivating me to post this. This bowl took me about 40 hours to put together. I found it in a collapsed cliff on the side of the river. I still go back and find a shard now and then, some of which are from fifferent bowls for sure. An occasional artifact is found there like the gray broken Fox Creek in one pic (and an intact Poplar Island not pictured). In another pic I am holdin gr a shard I recently found that fits in a hole. That will be tricky to get in there. The tempering is prrobably sand because there are not voids (shell or organics would have disintegrated) and no pebbles protrude, not a single one. I have a mug of parts I've spent countless hours playing and most definately fit this bowl but dont match any edges. There are parts missing. The small pine rod is helpinggv to hold two sides up. The rim photo is over 12 inches. The bowl is 14" high and the diameter is almost the same. I had to move 4 years ago and I didn't like transporting it but it made it. Some parts I mixed glue and sand to fill a weak spot but in general it is a simple, clean, unaltered restoration. I do not intend to fill in any spots with artificial restorings. I estimate it is middle woodland or earlier because the designs lack a clear collar and pattens are not carefully incised or zoned. There are two patterns that over lap. Of over 100 designs I've seen in this area, and hundreds of examples at two local museums I've only seen this pattern once, and in fact the section of bowl at the museum might be part of this bowl (or I'm dreaming). This bowl was repaired with drilled holes and ties at some point in ancient history and probably had at least 6 holes, one of which is still in tact. I send photos when I got it together to an acquaintance archeologist who in turn forwarded them to another who specialized in pottery but I never heard back about if either wanted to take a close up look. I obtained a couple other project to assemble over the years, not personal finds but finds of others who gave up trying to assemble. It's an amazing feeling and a privilege to work on this stuff. Enjoy!
Announcement
Collapse
No announcement yet.
14" bowl, 75 pieces est
Collapse
X
-
Birds of a feather, kayak man, yupp.that’s what I do is find things, even in pics..lol.... I’ll comment later, got to go shopping later, thanks bunches, yeah, pottery is heavier than it looks when it’s put together..nice presentation...Floridaboy.
- Likes 1
Comment
-
Just a quick comment for now, you did everything right, I agree, I wouldn’t completely fill it in, however if there any weak spots there’s a couple of ways to strengthen it, yeah, I use all kinds of sticks, toothpicks, etc. if the area is crumbly you can strengthen it with duco and acetone, it will soak in and harden, or take a piece of original pot that’s never gonna fit anything and carve it so you have a couple of edges to glue together, restoration is a highly complicated hobby.cant cover it in one small post.. again, nice job. p.s.I’ve probably done 50 of em and learn something new each time cuzz no two puzzles are the same.lol.
-
Also worth noting is the much thicker ring where plates of clay were mended together. The ring circumnavigates the bowl. Look at the photo above, left side about 5 inches down, a protrusion is clearly visible. I think this bowl has two areas like that. Although we are taught that NA pottery was made with coils I believe some athorities in the field have recognized the "sheet" construction possibilities. Also a theory which I do not believe is that the less thicker areas below that ring are from stirring food and wear, but if that were the case the imprints on the inside would have been worn smooth so I don't agree with that theory at this time.New Jersey
Comment
-
I love the way you think, you’re right on with everything, about the kill hole, your vessel, does not have one, ....There are two kinds, the first is punched out with force often taking out the whole bottom, but they are normally about 3”dia....The second is a pre made one, made and fired from the beginning,, there’s controversy as to the meaning, common belief is to let the spirit of the vessel out, or something like that,indians today could probably tell us I just never was interested enough to run it down..
-
Comment